Casio AP-400 Manual do Utilizador descarregar pdf (Página 15)

Send

This message is sent at initialization, when the panel tone selection is changed, and when a chorus on/off operation is

performed.

Receive

Changes Chorus Send.

9.16 NRPN (62H, 63H)

Format

Send

This message is not sent by this Instrument.

Receive

This Instrument does not have a corresponding NRPN message.

9.17 RPN (64H, 65H)

Format

9.17.1 Pitch Bend Sensitivity

Format

Send

This message is not sent by this Instrument.

Receive

Receipt changes Pitch Bend Sensitivity.

Message Format: BnH 62H vvH (LSB)

BnH 63H vvH (MSB)

n: MIDI Channel Number

vv: Value

Message Format: BnH 64H vvH (LSB)

BnH 65H vvH (MSB)

n: MIDI Channel Number

vv: Value

Message Format: BnH 64H 00H 65H 00H 06H mmH 26H **H

n: MIDI Channel Number

mm:

**:

Value 0 - 24

Ignored

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 44 45

Part I MIDI Message Overview 1
Part II Channel Message 1
Contents 1
Part III System Messages 2
Part V Parameter List 3
Part VI DSP Parameter List 4
MIDI Message Overview 5
1.4 Sound Generator Section 6
Channel Message 8
8 Polyphonic Key Pressure 9
9 Control Change 9
9.2 Modulation (01H) 10
9.3 Data Entry (06H, 26H) 10
9.4 Volume (07H) 10
9.5 Pan (0AH) 11
9.6 Expression (0BH) 11
9.9 Sostenuto (42H) 12
9.8 Hold1 (40H) 12
9.10 Soft (43H) 13
9.11 Vibrato Rate (4CH) 13
9.12 Vibrato Depth (4DH) 13
9.13 Vibrato Delay (4EH) 14
9.14 Reverb Send (5BH) 14
9.15 Chorus Send (5DH) 14
9.16 NRPN (62H, 63H) 15
9.17 RPN (64H, 65H) 15
9.17.2 Fine Tune 16
9.17.3 Coarse Tune 16
9.17.4 Modulation Depth 16
9.17.5 Null 16
10 Mode Message 17
10.2 Omni Off (7CH) 18
10.3 Omni On (7DH) 18
10.4 Mono (7EH) 18
10.5 Poly (7FH) 18
11 Program Change 19
12 Channel Aftertouch 20
13 Pitch Bend 20
System Messages 21
15.1.2 Master Balance 22
15.1.3 Master Fine Tuning 22
15.1.4 Master Coarse Tuning 22
15.1.5 Reverb Parameter 23
15.1.6 Chorus Parameter 23
15.1.7 GM System Message 25
15.1.8 GS Message 25
16 Format 27
16.3 Format of Each Field 28
16.3.6 cat : Category 29
16.3.7 mem : Memory Area ID 29
16.3.9 blk : Block Number 30
16.3.10 pkt : Packet Number 30
16.3.11 prm : Parameter ID 30
16.3.13 len : Data Length 31
Parameter List 33
19 Setup Parameter 34
20 Patch Parameters 34
20.4 System Reverb Parameter 35
20.6 Brilliance Parameter 35
21 Tone Parameters 36
21.2 LFO Parameter 37
21.3 DSP Parameter 38
DSP Parameter List 39
24 DSP Parameter Table 40
Setting Values and Send 41
Receive Values 41
Value Table 42
Frequency Value Setting Table 42
MIDI Implementation 44
Notation 44
CASIO COMPUTER CO.,LTD 45
6-2, Hon-machi 1-chome 45

Comentários a estes Manuais

Sem comentários

Casio AP-400 Manual do Utilizador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Os dispositivos de entrada Casio AP-400