
35052Ver2.00-EN.fm/
Schneider Electric
Totalising counters
Predetermining counters
Totalising timers
These are used for counting events from electrical pulses or contacts. The
value is displayed and updated in increments on each new pulse.
Application : counting the number of parts
In automatic mode : the totalising counter performs this operation in
conjunction with a photo-electric detector, inductive sensor or limit switch, which
detects the passing of a part and translates this by adding one unit to the number
of parts counted by the totalising counter.
In manual mode : the totalising counters performs this operation in conjunction
with a pushbutton. A press on the button adds one more unit to the value
displayed. This system can be used with a ticket distributor or a manual
assembly station.
These are used for counting events from electrical pulses or contacts. The
value is displayed and updated in increments or decrements on each new
pulse.
They can be used to enter a preset value manually. When this predefined
value is reached, they send an electrical signal. Predetermining counters can
be adding or subtracting.
Applications : upcounting or downcounting the number of parts.
The predetermining counter counts the number of parts in the same way as a
totaliser. When the selected value is reached, the preset counter, in
conjunction with the various sensors, sends a signal to trigger actions, such as
stopping a machine or conveyor belt.
These are used to count and display the time, with a precision of a hundredth
of an hour.
Applications : they can be used to measure the duration of an action or of the
use of a machine.
Oven
Counters
Totalising counters, predetermining counters and totalising timers
General
Applications
Signals
Supply
Stop belt
Limit switch
Characteristics :
pages
35053/2
and
35053/3
References :
pages
35054/2
and
35054/3
Dimensions :
pages
35055/2
and
35055/3
Comentários a estes Manuais