Casio PA-2400W Manual descarregar pdf (Página 65)

Title Command

FLCE (Idle Start)

This command passes the request right to the communication partner side and operates according to a command that

is requested by the communication partner.

If starting up the PA-2400W with this mode, only the /Y command can be specified.

(If this is done, the normal mode instead of the idle start mode is entered. In other cases, if script file name is

specified, a parameter error results and the function is terminated.)

Do not designate "H" as mode parameter when specifying the "/Y" command.

(If "H" is specified a parameter error results and the function is terminated.)

This command will be normally terminated by the reception of termination command except termination due to

error condition.

If a script file name is specified, communication will be performed according to the contents of the script file that

exists on the communication partner side.

If a script file name that does not exist on the communication partner side is specified, an error code will be

returned. However, in PA-2400W-to-PA-2400W communication mode, a script file will not be processed.

Therefore, it will be ignored if specified.

C Language Interface

Calling Sequence

FLCE [/Y= { [Device], [Baud rate], [Mode] } ] [Script file name]

Parameters

Script file name

Specify a script file name that exists on the communication partner side. Always enclose a script file name

with quotation marks, “ “.

Startup Examples

Descriptions of parameters, such as those for file specification, are eliminated in these examples.

In addition, assume the local machine is PA-2400W.

Session with PC

FLCE

Communication partner: Upload/download utility at host PC (command specification mode)

FLCE "casio.scr"

Communication partner: Upload/download utility at host PC (server mode)

FLCE /Y={COM1, , } "casio.scr"

Communication partner: Connected via cable to the Upload/Download utility at host PC

Session between PA-2400W-and-PA-2400W

FLCE

Communication partner: FLCE /Y= { , ,H } /S

FLCE

Communication partner: FLCE /Y= { , ,H } /R

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 82 83

Sem comentários

Casio PA-2400W Manual Página 65