Casio QV-30 Manual do Proprietário descarregar pdf (Página 5)

Auto Power Off

Power automatically turns off whenever you do not perform any cam-

era operation for a period of time. Power turns off after about two

minutes in the Record Mode or after about five minutes in the Play-

back Mode.

• To restore power, simply slide the POWER switch to the right as

you normally do.

Power Supply

Important!

The Auto Power Off function does not operate under the following

conditions.

• During Auto Play (page 43)

• When operations are being performed on a computer connected to

the camera via the camera’s DIGITAL terminal.

Getting Acquainted

Using AC Power

To power the camera from standard AC power, use the optional AC

adaptor (AD-C60).

AC power terminal

AC adaptor

AC outlet

AC Adaptor precautions

• Never use an electrical outlet whose

voltage is outside the rating marked

on the camera. Doing so can create

the danger of fire or electrical shock.

Use only the optional AC adaptor

specified for this camera.

• Should the cord of the AC adaptor

become damaged (exposed internal

wiring or shorts), request a replace-

ment from an authorized CASIO ser-

vice provider. A damaged AC adap-

tor cord creates the danger of fire or

electrical shock.

Caution

Power Supply

• Always be sure to use the AD-C60

AC adaptor only. Using any other AC

adaptor can cause damage to the

camera not covered by the warranty.

• When unplugging the AC adaptor

from the wall socket, be sure to

grasp the adaptor (not the cord).

• Avoid an undue bending, pulling,

and twisting of the AC adaptor's

cord, and never try to lengthen the

cord by splicing it with other wire.

• Be sure to switch power off before connecting or disconnecting the

adaptor.

• Always turn camera power off before disconnecting the AC adaptor,

even if the camera has batteries installed. If you don't, the camera

will turn off automatically when you disconnect the AC adaptor.

Even so, you run the risk of damaging the camera whenever you

disconnect the AC adaptor without first turning power off.

• The AC adaptor may become warm to the touch after extended pe-

riods of use. This is normal and is not cause for alarm.

• After use turn off the power switch of the camera and unplug adap-

tor from the AC outlet.

Caution

Operation

Recording Images

The following procedure provides the basic steps for recording an

image.

To record an image

1. Enter the Record Mode.

• Slide the function switch to the

REC position.

2. Turn on the camera.

• Slide the POWER switch in the di-

rection indicated by the arrow.

• The POWER switch automatically

slides back to its original position

when you release it.

• When power comes on, the image of the object that is in

front of the camera’s lens appears on the LCD.

• You can perform steps 1 and 2 in either order (1 then 2, or 2

then 1).

3. Set the NORMAL/MACRO switch to the NORMAL position.

• For close-ups, set the NORMAL/

MACRO switch to MACRO. See

page 25 for details on using this

switch.

Note

• The camera is designed to refresh the image on the LCD about

seven times per second. Because of this, you may experience a

feeling of jerkiness in the changing image if you move the camera

quickly. This is normal and does not indicate malfunction.

REC

PLAY

MACRO NORMAL

1 2 3 4 5 6 7 8 9 10 ... 17 18

Comentários a estes Manuais

Sem comentários

Casio QV-30 Manual do Proprietário Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras bridge Casio QV-30